SLEWING RING BEARING REFERENCES
Slewing bearing is a large of bearing with special structure that could bear integrated load like axle load, radial load and overturning load. It combines support, rotating, transmission, fixed, sealed, anti-corrosion and other functions into one unit.
Slewing bearing is a large of bearing with special structure that could bear integrated load like axle load, radial load and overturning load. It combines support, rotating, transmission, fixed, sealed, anti-corrosion and other functions into one unit.
Slewing bearing is same as normal bearings, it assembly by rings and rollers. However, compare to normal bearings, slewing bearing has a lot of differences. Normally, slewing bearing has huge dimensions, OD usually betwwen 0.4m to 10m, and some even to 40m. Under normal circumstances, slewing bearing operating in a low speed, high load condition.
Slewing bearing comes with mounting holes, lubricating holes and sealing device. It has compact stucture, convenience to guide rotate, simple installation and easy maintenance etc.
Rollix bearings with internal gear
07.0673.00, 07.0770.00, 07.0849.00, 07.0885.01, 07.0946.05, 07.1075.01, 07.1140.13,
07.1304.04, 07.1385.03, 07.1606.02, 07.1830.04, 07.1997.04, 07.2400.00, 07.2810.09
02 0245 00,02 0308 01,07 0380 01,02 0422 00,07 0489 11,02 0520 00,07 0573 00,
02 0626 01,07 0673 00,02 0720 02,07 0770 00,02 0820 00,07 0849 00,07 0885 01,02 0935 00,
07 0946 05,02 1050 00,07 1075 01, 07 1140 13, 02 1255 00,02 1295 00,07 1304 04,07 1385 03,
02 1415 00, 02 1565 02,07 1606 02, 02 1715 00, 02 1805 02, 07 1830 04,02 2040 00, 07 1997 04,02 2022 00,02 2202 00,07 2400 00,02 0256 00,02 2618 00,07 2810 09,02 3074 01
Rollix Crossed Rollers Without Gear
08.0220.05, 08.0270.04, 08.0307.00, 08.0340.04, 08.0400.00, 08.0405.05, 08.0475.08
08.0574.08, 08.0675.00, 08.0823.08, 08.0980.06
About more technical data,the technical team of Xuzhou xinda is always ready to interact with you at any time.Xuzhou Xinda also place every effort in protecting the environment .Customers’ can be assured that all possible measures are applied in order to ensure the smallest carbon footprint. Our products are widely used in the industries of Wind Energy Solar Energy and Water Energy.
We also can produce below most poluar model for Rother Erder Slewing Ring:
|
Model |
OD |
ID |
Heigtht |
Teeth No. |
Weight |
|
250.14.0300.013 |
401 |
233 |
40 |
Ungeared |
9.6 |
|
250.14.0400.013 |
501 |
333 |
40 |
Ungeared |
13.1 |
|
250.15.0300.013 |
401 |
233 |
40 |
Ungeared |
9.6 |
|
250.15.0400.013 |
501 |
333 |
40 |
Ungeared |
13.1 |
|
250.15.0375.013 |
400 |
234 |
40 |
Ungeared |
9.6 |
|
250.15.0475.013 |
500 |
334 |
40 |
Ungeared |
13.1 |
|
230.20.0400.013 |
518 |
304 |
56 |
Ungeared |
23.4 |
|
230.20.0500.013 |
648 |
434 |
56 |
Ungeared |
31 |
|
230.20.0600.013 |
748 |
534 |
56 |
Ungeared |
36.4 |
|
230.20.0700.013 |
848 |
634 |
56 |
Ungeared |
42.8 |
|
230.20.0800.013 |
948 |
734 |
56 |
Ungeared |
47.8 |
|
230.20.0900.013 |
1048 |
834 |
56 |
Ungeared |
53.1 |
|
230.20.1000.013 |
1198 |
984 |
56 |
Ungeared |
61.9 |
We can provide sepcial service according to customer’s requirment.
This method ------ slewing bearing is after special treatment, and has the function of anticorrosion-------it is widely used in many fields that need to be anticorrosive, such as container crane, steel mill-----which adapt to the damp & bad circumtance, so the life of the slewing rings will can be relatively extended.
If you have your specific parameter and requirements for our slewing ring bearings, customization is available.
| Standard series KD210 | |||||
| Model | OD | ID | Heigtht | Teeth No. | Weight |
| 250.14.0300.013 Typ 13/400 |
401 | 233 | 40 | Ungeared | 9.6 |
| 250.14.0400.013 Typ 13/500 |
501 | 333 | 40 | Ungeared | 13.1 |
| 250.15.0300.013 Typ 13/400 |
401 | 233 | 40 | Ungeared | 9.6 |
| 250.15.0400.013 Typ 13/500 |
501 | 333 | 40 | Ungeared | 13.1 |
| 250.15.0375.013 Typ 13/400 |
400 | 234 | 40 | Ungeared | 9.6 |
| 250.15.0475.013 Typ 13/500 |
500 | 334 | 40 | Ungeared | 13.1 |
| 230.20.0400.013 Typ 21/520.0 |
518 | 304 | 56 | Ungeared | 23.4 |
| 230.20.0500.013 Typ 21/650.0 |
648 | 434 | 56 | Ungeared | 31 |
| 230.20.0600.013 Typ 21/750.0 |
748 | 534 | 56 | Ungeared | 36.4 |
| 230.20.0700.013 Typ 21/850.0 |
848 | 634 | 56 | Ungeared | 42.8 |
| 230.20.0800.013 Typ 21/950.0 |
948 | 734 | 56 | Ungeared | 47.8 |
| 230.20.0900.013 Typ 21/1050.0 |
1048 | 834 | 56 | Ungeared | 53.1 |
| 230.20.1000.013 Typ 21/1200.0 |
1198 | 984 | 56 | Ungeared | 61.9 |
